Skip to main content

Filter By:

Packs/Systems

$36.99
Insulated bottle holder with Swix 16oz bottle included. Mesh zippered pocket with reflective piping. Padded mesh back for breathability, clip waist strap.
$39.99
Insulated drink belt that holds 1 liter of liquid and keeps it from freezing or keeps it warm. Zipper compartment on top to store food and media. Two color webbing with clip at waist. Volume: 1 liter.
$39.99
Fully insulated 1 liter reservoir prevents freezing and cooling. - Separate zipper compartment on top for extra storage. - Protected inside stretch pocket for media. - Nameplate on outside for easy identification. - LED light with protective sleeve.
$50.00
The Mini-M.U.L.E is the ultimate kids hydration pack that lets them carry the essentials when headed out with their parents.
$60.00 - $99.99
Mini and mighty! Our stacked, smaller pack proves big adventures come in small packages. Adventure awaits, wherever you are.
$75.00 - $85.00
The ideal option for hard-charging riders who need more than a water bottle, but who don’t want to carry a full backpack, the Repack offers a minimalist approach to wearable hydration. As part of CamelBak's Low Rider MTB collection, it keeps your water and cargo centered around your waist, leaving your shoulders and back free. As a result, you’ll have a lower center of gravity and more mobility on the trail — plus, no more sweaty back and sore shoulders at the end of the day. With a 1.5-liter reservoir, integrated carry pockets, and the stability of a customizable fit, the Repack frees you up to ride light and fast over any terrain. Features: - Load-Bearing Hip Belt with Cargo Pockets: Wide waist belt optimizes fit and keeps essentials close at hand - Integrated Carry Pockets: Keep your tools and repair kit organized - 1.5L CRUX Reservoir: Faster flow rate for better hydration - Dual Reservoir Compression Straps: Cinch the reservoir into the small of your back for stability and a tight fit - Magnetic Tube Trap: Keeps your tube secure and accessible when you need it - Reflective Accents: For better visibility in low light environments Specifications: - Hydration type: CRUX Lumbar Reservoir with Magnetic Tube Trap - Gear capacity: 2.5L/150 cu in - Pack weight: 310 g/0 lb 11 oz - Dimensions: 18.5 x 28 x 15.5 cm / 7.3 x 11 x 6.1 in - Fits torso: 71-116 cm/28-48 in - 4 exterior pockets
$79.95
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$85.00
The ideal option for hard-charging riders who need more than a water bottle, but who don't want to carry a full backpack, the Repack offers a minimalist approach to wearable hydration. As part of our Low Rider MTB collection, it keeps your water and cargo centered around your waist, leaving your shoulders and back free. As a result, you'll have a lower center of gravity and more mobility on the trail-plus, no more sweaty back and sore shoulders at the end of the day. With a 1.5-liter reservoir, integrated carry pockets, and the stability of a customizable fit, the Repack frees you up to ride light and fast over any terrain.
$89.95
Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The Delta 200 mounts on the saddle rails for no measurable drag. Our most popular single rear carrier includes Xlab's Gorilla XT carbon cage which provides a tight 14-pound grip on your bottle. It mounts to most standard metal-rail saddles (for carbon rails, purchase the optional Delta Adapter). For a complete system, purchase the optional X-Strike Inflation Kit and store up to 4 CO2 cartridges.
$98.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
$100.00
Everybody doesn't necessarily work for EVERY body. The Women's Chase Bike Vest was designed for our fearless female riders. For elite racers to the everyday enthusiast, Chase has been redesigned with lightweight, breathable materials and a comfortable all-day fit. Tailored to fit female frames, the s-curved shoulder harness is specifically contoured to fit a woman's body for added comfort and stability. Designed with body-mapping technology, strategically positioned 3D vent mesh moves more air to keep you cool. Stay fully hydrated and prepared for any terrain out there with 1.5-liters of water, integrated tool organization, and reflectivity to be safely seen. Thoughtfully engineered to take your mind off your gear so you can focus on the ride.
$105.00
Less is truly more when you hit the trail. The lighter the load, the faster the ride.  It's all about the chase with a new spin on our essential hydration bike vest. Redesigned with lightweight, breathable materials and a comfortable all-day fit-our Chase Vest has you covered. Easy-access pockets on the harness serve as a command center for your phone, nutrition, and anything else you need on the fly. Strategically positioned 3D vent mesh moves more air to keep you cool. Stay fully hydrated and prepared for any terrain out there with 1.5-liters of water, integrated tool organization, and reflectivity to be safely seen. Thoughtfully engineered to take your mind off your gear so you can focus on the ride.
$127.95
Introduction - Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years. - Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag. Storage - We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP. - As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG. - Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG. Hydration - With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers. Adjustable Mounting - One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation. - In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions. Lightweight - We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams. Bottom Line - The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros! Includes: - Carbon Sonic chassis - One Pair X-Straps - All hardware and instructions Material - Carbon Fiber proprietary unidirectional orientation. Weight - Chassis 49 grams, Hardware 30 grams. Total 79 grams Limited Lifetime Warranty - Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.
Page 1 of 1