Parts & Accessories
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare. - Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle - Compatible with Garmin bike computers and Multisport Watches - Requires Versa Carbon Mount or Versa Aluminum Mount Telescoping Garmin-Specific Computer Mount - Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches. On-the-Go Computer Tilt Adjust - Avoid changing glare with a tilt mechanism for easy adjustments while you ride Arrives Fully Assembled - Few steps required to install and head out on your first ride - Weight: 1.9oz (54g) - Construction: Nylon Composite Includes - Fully assembled computer mount - 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates Warranty: Limited Lifetime
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)
Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride! - Material: Forged aluminum / Engineering grade polymer - Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma - Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500 - Bracket: Fits 25.4 – 31.8mm handlebars (shims included) - Max Load: 480g / 16.93oz - Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase) - Weight: 52g / 1.83oz - Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
Enjoy easy viewing with the Butler Out Front handlebar mount! Out Front Mount for following models: BC 1909 STS BC 2209 STS ROX 5.0 ROX 6.0 ROX 8 ROX 8.1 ROX 9 ROX 9.1 *Note: not for use with ROX 10.0
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
Connect your PC to CycleOps VirtualTraining.
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
This mount integrates with your Quick-Release Aerobars by attaching directly to one of the aerobar handlebar clamps and provides and out-front section of bar for attaching computers or other accessories. Benefits: - Positions your computer for easy viewing in road or aero riding positions - Stays attached to your bicycle when aerobars are removed Details: - Provides two mounting heights and 3 positions to fine tune your computer's position - Integrates with the optional Water Bottle Mount, putting all your essentials at your fingertips - Includes all necessary mounting hardware
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. Lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. The Direct Mount version is for inverted forks such as the RockShox RS-1. Features & Benefits: - Automated tuning recommendations. - Shock tuning score - a snapshot of how well your suspension is set up for you. - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months. - Waterproof and dustproof - IP67 rating. - Two alternative hoses (included) offer a range of fitting options. - Smartphone app is compatible with Apple and Android phones. Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, adapter for conventional forks and rear shocks, rubber mounting boot and zip ties.
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle
The Vibe Aero Race Mount is designed for the PRO Vibe Aero handlebar/stem combination. Made of high-quality CNC machined 6061-T6 Aluminum, it fits all Pro handlebar/stem combinations. - Compatibility (Regular): GARMIN 820, 520, 25, 20 - Compatibility (XL): GARMIN 1030, 1000, 820, 520, 25, 20 - Lifetime Guarantee - Weight: 30g
Wire harness and hardware to measure computer data based on the front wheel. - Fits most bars bars (25.0 to 31.8mm), 86cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Compatible with: Protege 5.0, 8.0 and 9.0
Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers
Protege wire harness and hardware with extra length for use with tandem and recumbent bicycles - Contains bracket with 160cm wire, wheel magnet and zip ties - Brackets fits Standard (25.4-26.0mm) bars - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for long wheelbase recumbent and computer installs on a tandem’s rear bars
- Contains universal handlebar/stem compatible bracket, sensor and magnet - Compatible with Protege 9.0 wireless computer - Will not convert standard Protege 9.0 to wireless
Page 1 of 6 Next page